（急）（14/9更新）關於win7 64bit ram usable

本帖最后由 Force_Wind 于 2014-9-14 08:49 AM 编辑

14/9更新
×已经确定我用的是独立graphic card了，不是 on board 的
×分别测试了ram单独跑的状态下都能跑满2gb


這是我的bios 的IGC tab
我被吃掉的ram是1GB多 可是這裡只有128mb
請問還有方法知道我剩下的ram跑到哪裡去了嗎

2014-9-13 05:53 PM 上传

下载附件 (115.64 KB)
bios

bios也是好好的显示4gb ram

2014-9-14 08:35 AM 上传

下载附件 (64.27 KB)

resource monitor

2014-9-14 08:48 AM 上传

下载附件 (99.12 KB)
1

==================================================================================
我目前是ddr2的2X2gb ram
但是不知道為什麼ram usable只有2.75
然後我爬過之前的貼用了之前的方法都不成功
("msconfig"還有“system performance advance setting"的方法都試過了)

2014-9-12 06:46 AM 上传

下载附件 (44.98 KB)
ram usable

電腦配備如下

2014-9-12 06:54 AM 上传

下载附件 (138.48 KB)
cpu-z

几乎爬完google 百度前20面的贴了，没一个成功
搜索关键字 ：win 7 64bit ram usable 2.75GB   /    win 7 64位 可用内存 2.75GB

去BIOS把 Integrated graphics card disable 掉。

同楼上，我也觉得是 on board 的 display 吃掉了，disable 就行了。

妈妈版的问题

你妈的板是用share video memory的。要调就进bios看有的调share几多，没得话就加一张graphic card

本帖最后由 Force_Wind 于 2014-9-12 05:59 PM 编辑

請問可以教我怎麼進bios調嗎？
如果調了我的gpu會不會出問題之類的？

PS: 請問照這個步驟走對嗎？

Step 1
Restart or turn on the PC. Check the boot screen for a message such as "Press F8 to Enter Setup" or "BIOS Setup: F8." The function key varies depending on the motherboard manufacturer.

Step 2
Follow the on-screen prompt to access the BIOS. If the computer begins to boot into Windows, press "Ctrl-Alt-Del" to restart and try to enter the BIOS again.

Step 3
Use the arrow keys to select "Advanced," "Advanced BIOS Features" or a similar option from the menu. Press "Enter."

Step 4
Select "North Bridge Configuration," "Video Configuration," "Internal Graphics" or similar option from the sub-menu, if available. Press "Enter."

Step 5
Look for and highlight an option such as "Primary Video Controller," "Primary Video Adapter" or "Initiate Graphic Adapter." Press "Enter."

Step 6
Select "GFX0" or "PEG" to switch to a peripheral component interconnect express card, "PCI" to switch to a PCI card, "AGP" to switch to an accelerated graphics port card or "GPP" to use multiple graphics adapters.

Step 7
Press "Enter" to change the graphics settings. Press "F10" and press "Enter" again to disable on-board graphics.

更新问题14/9
求高手相助