|登录 |注册

楼主: momo0820
打印 上一主题 下一主题

珠子塞进耳机洞!?!?!

[复制链接]
chaiwh
2013-10-9 05:08 PM
什么 model ?
你的 case 我遇过几次... 每次都是拆机....
momo0820
2013-10-9 07:26 PM
chaiwh 发表于 2013-10-9 05:08 PM
什么 model ?
你的 case 我遇过几次... 每次都是拆机....

如果我说我不知道是什么model你会原谅我吗?
acer机来的。。。会难拆的吗?
chaiwh
2013-10-9 08:55 PM
momo0820 发表于 2013-10-9 07:26 PM
如果我说我不知道是什么model你会原谅我吗?
acer机来的。。。会难拆的吗?

acer 机有些 model 不好拆。
你反过来看底部有写的。
aspire 还是 travelmate 什么的。。
momo0820
2013-10-9 10:53 PM
chaiwh 发表于 2013-10-9 08:55 PM
acer 机有些 model 不好拆。
你反过来看底部有写的。
aspire 还是 travelmate 什么的。。

acer aspire 4750
model number: MS2316

怎么样?会难吗?
求指点迷津啊~~
chaiwh
2013-10-10 11:20 AM
本帖最后由 chaiwh 于 2013-10-10 11:22 AM 编辑

http://www.laptopinventory.com/L ... er/Aspire/4750G/Fan


How to Remove Replace and Install Your Acer Aspire 4750G Laptop Heatsink Fan

1. Inorder to replace fix or install your new Acer 4750G laptop fan and heatsink, you will need to open up your laptop. You can do this by removing the screws from the bottom of the laptop.

2. Once the screws have been removed from the bottom of your laptop, you can now remove the keyboard and plastic bezels from your Acer 4750G laptop.

3. You will see your Acer 4750G Fan and Heat Skin exposed.

4. Use a screw drivers and remove the screws from you Acer 4750G HeatSin Fan.

5. Before reinstalling the new Acer 4750G Fan onto your laptop, you can clean the Acer 4750G Fan. To clean your Fan and Heatsink, use a can of air and blow out any dirk from your Acer 4750G Fan. You can also use a paint brush to clean out the dirt from the hard to get areas. Somtimes cleaning your Acer 4750G laptop fan will actually repair it. Dirt can cause the Acer 4750G Laptop Fan to make noise and even stop spinning properly.


acer aspire 4750 属于容易拆。
treize
2013-10-10 12:25 PM
本帖最后由 treize 于 2013-10-10 12:33 PM 编辑

呵呵,我也发生过跟你一样的情况,我的是acer 4752的,这个珠子有点硬,我找一支很硬很尖的铁枝,把珠子弄破碎(珠子期间会移动到更深入,不用担心,最后珠子也无路可退的 ),之后清理破碎粉末干净就好了。
momo0820
2013-10-10 02:40 PM
chaiwh 发表于 2013-10-10 11:20 AM
http://www.laptopinventory.com/LaptopInventory.php/Acer/Aspire/4750G/Fan

  你帮我。。。
哈哈。。。不敢勒==” 我很“鸡手鸭脚”。。。
momo0820
2013-10-10 02:41 PM
treize 发表于 2013-10-10 12:25 PM
呵呵,我也发生过跟你一样的情况,我的是acer 4752的,这个珠子有点硬,我找一支很硬很尖的铁枝,把珠子弄破 ...

我也试过用针插,可是不敢太出力,
怕会伤到孔里面的东西。。。

你没hurt到什么?
就用蛮力一直duk它罢了?
chaiwh
2013-10-11 10:26 AM
momo0820 发表于 2013-10-10 02:40 PM
你帮我。。。
哈哈。。。不敢勒==” 我很“鸡手鸭脚”。。。

你在那里 ?
momo0820
2013-10-11 02:57 PM
chaiwh 发表于 2013-10-11 10:26 AM
你在那里 ?

霹雳。。。金宝~~~
XD
您需要登录后才可以回帖 登录 | 注册

JBTALKS.CC |联系我们 |隐私政策 |Share

GMT+8, 2026-1-3 05:13 AM , Processed in 0.101350 second(s), 19 queries .

Powered by Discuz! X2.5 © 2001-2012 Comsenz Inc.

本论坛言论纯属发表者个人意见,与本论坛立场无关
Copyright © 2003-2012 JBTALKS.CC All Rights Reserved

Dedicated Server powered by iCore Technology Sdn. Bhd.

合作联盟网站:
JBTALKS 马来西亚中文论坛 | JBTALKS我的空间 | ICORE TECHNOLOGY SDN. BHD.
回顶部