[原创]我又来鸟...跟大家分享下偶刚买的新壳SG01，看第十四页

这个是Memorial model
                    PC-777

mini的不错下，你有卖吗？三层的太夸张啦...

Silverstone SG01 evolution

我那小店哪里会有卖涡...
Silverstone看起来比较漂亮...

SG01有考虑过，价钱要$185.但是怕偶的ORB II下不到...

Silverstone SG01 evolution
263 mm (W) x 216 mm (H) x 393 mm (D)

Blue Orb II
140mm x 66mm


SG01-Evolution compatibility notes:
- CPU cooler cannot exceed 78mm in height
- The combined depth of power supply and optical drive cannot exceed 355mm



Equip your SG01 with NT06-Lite for the ultimate combination of quietness and performance

偶，可以喔...黑色美还是银色美？原本有想过要Silverstone TJ04或PC7+....你建议呢？SG01怕善热不好...

TJ04样子好像I-Cute/Cm的普通Casing勒...不杀的..哈哈
而且,前几天有看到一个报导..好像是intel讲的,Barebone主机将在近年成为主流


The top of the case comes with two sets of vent holes to allow for the exhaust of the interior 80mm fans. Unfortunately only one fan is located in the upper location of the case. Users must provide the second case fan.

On the sides of the SG01-E has a long row of air vent holes for cold air intake. Looking thru the holes on the left side of the case you can see one lone 80mm case fan.

Giving an overview of the interior of the SG01 will provide you a picture of a pretty roomy enclosure for a SFF. Take in account that this unit will house two hard drives, two 5.25 drives, a full size power supply, mATX motherboard and three 80mm case fans. That’s as much as a small mini sized tower.

The first thing that you will see when you remove the sides from the SG01 is the mounting piece for two 80mm case fans. Only one fan is included for this bracket.

看起来..散热好像不错勒...黑色比较杀..

More space then most SFF barebones
Places for 3 80mm case fans
Can use a standard size power supply
No special CPU cooling needed
Looks good





[ 本帖最后由 y0! 于 2006-12-17 10:49 AM 编辑 ]

看了...有80%想买乐...

下次不是不可以下8800GTX乐？GC肯定长过母板...