JBTALKS.CC

标题: printer打印出来的走位~ [打印本页]

作者: 凡俊 时间: 2014-7-9 05:27 PM
标题: printer打印出来的走位~

我使用的printer是canon mx377, 才买了两个月，打印出来的东西有点走位，到底是什么问题啊？刚买回来时还没开始用就走位得和厉害，然后canon的technician来帮我修好了，他说是printer里面肮脏罢了，抹一抹就好了（但不懂他抹哪里

)。直到现在又开始走位了, 请问是要抹哪里的啊？我差不多要把这架烂机给丢了！！

IMG_0003_NEW.jpg (267.83 KB, 下载次数: 0)

作者: ahyu96 时间: 2014-7-9 05:47 PM
试看，轻轻用tisu抹这个透明带~

DSC_0345.JPG (771.64 KB, 下载次数: 3)

作者: YongHaoSiow 时间: 2014-7-19 03:27 PM
我也试过这样的问题==要怎么解决

作者: X-Pro 时间: 2014-7-28 04:55 PM
本帖最后由 X-Pro 于 2014-7-28 05:03 PM 编辑

要做 Automatic Print Head Alignment

Make sure that the power is turned on.

Load a sheet of A4 plain paper in the front tray.

(1) Press the Setup button.

The Setup menu screen will appear.

(2) Use the 《 or 》 button to select Maintenance, then press the OK button.

LCD and Operation Panel

(3) Use the 《 or 》 button to select Head alignment, then press the OK button.

The print head alignment sheet will be printed.

(4) When the message "Are the patterns fine?" appears, confirm that the pattern is printed correctly, select Yes, then press the OK button.

把印出來的線條紙放在掃描的玻璃片上，字朝下，箭頭在裡面

Load the print head alignment sheet WITH THE PRINTED SIDE FACING DOWN and align the mark on the upper left corner of the sheet with the alignment mark .

(2) Close the document cover gently, then press the Color button.

The machine starts scanning the print head alignment sheet, and the print head position will be adjusted automatically.

When adjusting the print head position is complete, remove the print head alignment sheet on the platen glass.

作者: winsontan1978 时间: 2014-8-6 04:31 PM
提示: 作者被禁止或删除内容自动屏蔽

欢迎光临 JBTALKS.CC (https://mobile.jbtalks.cc/)